Today, sheds are not just storage spaces; they serve many purposes. A modern shed can be used as a play area for children, a home office, a workshop or even as a spare room to relax. You can also use concrete in your backyard if you are planning to erect a clothesline or to host a summer barbeque with your family and friends. Additionally, a concrete patio will make for an excellent selling point for your house should you decide that is the way to go. Whatever the reason, there will be many designs that you can implement to get a shed that fits what you had in mind.
Many people prefer to do concreting for themselves. A ‘do-it-yourself’ project can either save you a lot of money or be a complete disaster. For starters, you will need to get approval for your shed. Once that hurdle is crossed, you will need to plan and know what you need before you get started. You might need to get the equipment in Artarmon concrete care hire shops that you need. To help you towards that end, here are five things you should consider:
As mentioned earlier, a patio could serve many purposes. However, rather than concreting your backyard and then wondering what to do with the extra space later, it makes more sense to start with the question. It will guide the design of the patio. Many people prefer to make rectangular sheds at the backsides of their homes. Of course, this is functional, but it must not limit you. You can incorporate different shapes in your shed. You can even play around with the location and edges. If you are adventurous, consider leaving borders and planters.
You do not want a patio that pools when a little water is poured. Therefore, you will want to consider drainage. Is your backyard sloped? Might you need to grade the area before concreting? To measure the slope, drive stakes under the ground at the ends of the area you intend to concrete. Join the stakes with a string and make sure that it is straight. Measure the distance from the ground to the string at each stake and compare.
Concrete is made by mixing water, gravel, sand and cement. You need to know how to combine the ingredients if you will create a quality shed. Sand fills the spaces between gravel and cement glues them together. Water starts the hydration process and causes the concrete to harden. Too much water will reduce the compressive strength of the concrete while too little will be unworkable. Many Artarmon concrete care hire services have recommended ratios that you can use.
It takes expertise to know the right time to start finishing concrete. It is not enough to do it when there is no more bleeding water or when the pavement passes the footprint test. Premature finishing or even over-finishing can cause blisters, crazing or dusting in the concrete. All these things will affect the durability of your patio.
All patios need a control joint if you are going to minimize cracking. Research if you must, but make sure you include control joints into your design. You can consider creating a tile pattern or scoring diagonals.
Curing occurs after finishing. It is the process that stops fresh concrete from drying out too fast. The longer the curing time, the stronger the concrete will be. You need to know how long you will let your shed cure. You also need to decide on what curing compound to use before time. You can buy one from an Artarmon concrete care and hire service shop. The compound blankets the concrete slowing down evaporation.
Concreting your patio is no child’s play. You need to count the costs before you begin otherwise it will prove disastrous. To learn more about what equipment and supplies you will need to get your concrete job done, contact your local tool supply shop.